Leica GR10, Operational Manual

Page: 161 / 317

Printed Documentation
Network connections: Ethernet
Background Information
Ethernet configuration enables the receiver to be accessed via the internet when an Ethernet cable is connected.
Setting Descriptions
The table below describes the settings that can be configured on the Ethernet tab.
Hostname Description
Receivers hostname
Enter a hostname (device name) for the receiver.
•
Only certain characters are allowed.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- (hyphen is allowed)
When running the receiver in a LAN, the hostname allows access to the
web interface without knowing the IP address assigned to the receiver by
the
DHCP
server.
The default hostname for each receiver is GRxxxxxxx, where xxxxxxx is
the serial number. DHCP is enabled per default. When first connecting
the receiver to a LAN that runs a DHCP server, entering the default
hostname in a browser window opens the receivers web interface. The
user does not need to know the IP address assigned to the receiver.
IP settings Description
Obtain an IP address
automatically
Activate to obtain the IP address automatically using
DHCP
.
For more information on how to access the web
interface in a non-DHCP network, please refer to
Setup in a non - DHCP network .
IP address
Enter the internet protocal address of the receiver.
This field can only be edited if the
Obtain an IP address automatically
160