Leica GR10 Operational Manual Download Page 227

Page: 227 / 317

Printed Documentation

GNSS Spider <-> GR10 configuration

When working with a GR10 and an active connection to Leica GNSS Spider, the settings on the receiver can be

changed from either side. The last stored/uploaded settings will overwrite everything that had been configured

before.

Starting and Stopping the active GR10 site in Leica GNSS Spider has only an effect on the

__spider

logging session

and the Spider data streams in the GR10.

It activates or deactivates the logging session and deletes or creates the data streams. All other logging sessions and

data streams are not affected by a start or stop of a GR10 GNSS Spider site.

When the user selects

Upload settings

in the Leica GNSS Spider software, all settings configured for this site are

uploaded to the connected receiver. Since this includes tracking settings, changes of the site code and the receiver

coordinates, logging and streaming is interrupted every time the Spider configuration is loaded onto the GR10.

For advanced information refer to the Leica GNSS Spider Online Help.

Related topics

GNSS Spider logging session

GNSS Spider data streams

226

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands