manualshive.com logo in svg

SMD SMD 40/433, Quick Start Manual

Share
Download
SMD SMD 40/433 Quick Start Manual Download Page 1

RadioControl SMD AB | Kolholmevägen 4 | 453 50 Lysekil | Sweden | +46 523 166 10 | [email protected] | www.radiosmd.se

Quick Start Guide
SMD 40/433

v.1

Summary of Contents for SMD 40/433

Page 1: ...RadioControl SMD AB Kolholmevägen 4 453 50 Lysekil Sweden 46 523 166 10 info radiosmd se www radiosmd se Quick Start Guide SMD 40 433 v 1 ...

Page 2: ...rectly on the housing a 900 angle connector is advised Point the antenna 450 away from the wall if the receiver is installed on a metal wall More information about antennas can be found on the back of this folder If both the internal PCB antenna and the external antenna interface is to be active for example with antennas on both sides of a metal wall please state when ordering All receivers are eq...

Page 3: ...smitter button for wich you want to assign a function while doing this press the learn button for the relay in the receiver Release the buttons and the function is programed Changing the working mode of the relay The relay s of the receiver can be either latching or non latching To change the working mode simply change the corresponding DIP switch for the relay inside the receiver On latching off ...

Page 4: ...s necessary Make sure to keep distance between antenna and hi voltage cables If the transmitter is installed on a metal sheet wall it is advised to point the antenna 450 away from the wall using a 900 angle fitting Min 200 mm min 300 mm Cables It can sometimes be necessary to use two antennas typical application for this is when the radio controls a gate on a building made with metal sheet walls I...

Reviews:

No comments

Brands by name

Popular brands

Load more brands