Leica GR10 Operational Manual Download Page 194

Page: 194 / 317

6: Context sensitive help

Device Management: Radio

Background Information

View and delete radio devices to be used with the receiver.

Setting Descriptions

The table below describes the settings that can be viewed on the Radio tab.

Settings

Description

Icon

Device is in use. If a device is in

use it cannot be deleted.

Name

The device name.

Click the device name to view the device
communication settings.

Port

The port the device can be connected to.

Delete

Press delete to permanently delete the device.

Restore all default phones and radios

Press to restore the default values.

•

All deleted default devices are
restored.

Related topics

Device Management: Modem / Phone

193

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands