background image

1

US english

G

Warning

Danger of accident

-

Do not program the navigation unit while driv-
ing.
Destinations should only be entered when the ve-
hicle is stationary.
Use of the navigation unit is only advised if the
traffic conditions are suitable and you are abso-
lutely sure that its use presents no risk, distraction
or inconvenience to you, your passengers or oth-
er road users.

G

Warning

Danger of accident

-

Do not ignore traffic laws.
The requirements of the traffic laws take prece-
dence over instructions you may receive from the
navigation unit. It is possible that you may re-
ceive inaccurate or incorrect instructions due to
changes in traffic routes, e.g. due to road con-
struction or deviating data. Therefore, you must
always observe the actual road signs and traffic
regulations.

G

Warning

Danger of accident

-

Do not misuse the unit.
The navigation system serves solely as an aid to
navigation. In particular, the navigation system
must not be used as an orientation aid at times of
poor visibility. The volume of the radio and the
navigation system should be adjusted so that
noises external to the vehicle are still audible.
Turn the unit off immediately if a serious mal-
function occurs.

Summary of Contents for TRAFFIC PRO

















































Reviews: