Leica GR10 Operational Manual Download Page 41

Page: 41 / 317

Printed Documentation

necessary.

Active logging sessions are configured but

•

The SD card is full

•

No navigated position is available.

Recommended user action:

Check the SD card and the tracking status.

The time since the receiver was turned on.

This icon is only shown if the receiver is turned on because of an active

wake-up session

Smart clean-up status

Smart clean-up is active.

Smart clean-up is inactive.

Indicates active logging sessions are available and Smart clean-up is deleting data from all or some of

these sessions.

Recommended user action:

Please check the remaining space on the SD card and delete old data if

necessary.

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands