Leica GR10 Operational Manual Download Page 27

Page: 27 / 317

Printed Documentation

Wall / Cabinet Mount

Together with the wall mount accessory kit the GR10 can be easily mounted onto an existing wall or structure, or

inside an environmental case.

•

If space in the cabinet is limited, then the rubber bumpers on the GR10 can be removed. If the bumpers

are removed, please remove the small feet from the mounting brackets.

•

The radio/GSM antenna must be installed on the outside of the rack if a slot-in radio or GSM device is

used. Attach the Radio/GSM antenna cable to port P3.

Radio/GSM antenna

Antenna bracket

Radio/GSM antenna cable

Wall mount accessory - bracket

Wall mount accessory - screws

Rubber bumper

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands