Leica GR10, Operational Manual

Page: 34 / 317

4: User Interface
Function button
All the following functions described assume the GR10 is already on.
Button Function
Function
The Function and ON/OFF button work in combination and allow a number different
functions as described in Button combinations .
The Function button switches between these different functions.
Button combinations
Function
Activate dual button functionality
Press and hold both buttons until all LEDs are flashing. After 1 s the Raw data logging LED starts flashing
slowly.
The following instrument commands are now activated.
Start/Stop all logging sessions
Activate dual button functionality as described above.
If all logging sessions had been off, the Raw data logging LED is flashing green.
•
Press the Function button until the LED flashes quickly to START all configured logging sessions if the
Raw data logging LED is flashing green.
OR
If any logging session had been active, the Raw data logging LED is flashing red.
•
Press the Function button until the LED flashes quickly to STOP all active logging sessions if the Raw
data logging LED is flashing red.
After logging has been started or stopped, the LED and instrument functionality goes
back to general behaviour.
Start/Stop all data streams
Activate dual button functionality as described above.
Press the Function button until the RT out data streams LED starts flashing slowly:
If all data streams had been off, the RT out data stream LED is flashing green.
•
Press the Function button until the LED flashes quickly to START all configured data streams if the RT
out data steam LED is flashing green.
OR
33