Leica GR10 Operational Manual Download Page 91

Page: 91 / 317

Printed Documentation

By default, the Ethernet connection is set as the default gateway. The default gateway can be

changed to the mobile internet connection. The configured connection used as the default

gateway is displayed on top and shows (default gateway) in the header.

TCP/IP over USB

Description

Status

The status of the configured network connection,

Connected

Disconnected

IP address

The default IP address for accessing the web interface via a USB device.

Subnet Mask

The default subnet mask for the connection.

Data sent

The amount of data sent out from this connection, in bytes.

Data receive

The amount of data received by this connection, in bytes.

Device name

States that this USB conection is established via the USB host port.

DynDNS

Description

Status

Indicates if updating the IP address of the receiver at the DynDNS service was
successful.

Service provider

The DynDNS service provider configured.

Last IP up ate

The date and time when the IP address was last updated at the DynDNS service.

Hostname

The hostname of the receiver that is registered with the DynDNS service.

Registered IP address

The IP address sent to the DynDNS service. This IP address is used to access
the receiver when entering the URL in a browser window.

Related topics

Network connections: Overview

Network connections: Ethernet

Network connections: Mobile Internet

How to set up a mobile internet connection

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands