Leica GR10, Operational Manual

Page: 163 / 317

Printed Documentation
Network connections: Mobile internet
Background Information
Use mobile internet configuration to configure mobile internet access (e.g. via GPRS device) to the receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Mobile internet page.
Configure device for internet
usage Description
Device
Select the device to be used to connect the receiver to the internet. All
phone/modem devices configured in the device management with
mobile internet capability are listed.
When
Not used
is selected, all fields below are hidden.
Note: To select a device, the device must be configured in advance via
Device Management .
Pin code
Enter the pin code for the used SIM card.
Puk code
Enter the Puk code for the used SIM card. Usually this field can be left
blank.
The Puk code is a security code for the SIM card for some devices. The
Puk code needs to be entered when the pin code has been entered
incorrectly more than three times. The Puk code will unblock the SIM
card.
APN
Enter the access point name (APN) of a server from the network
provider, which allows access to data services. Contact your provider to
obtain the correct APN.
User name
Necessary to access certain APN's. Contact your provider for the APN
user name.
Password
Necessary to access certain APN's. Contact your provider for the APN
password.
IP address
Select a dynamic or static IP address to be used. For a static address
enter the IP address manually.
Use as default gateway
The receiver can connect to the internet via the mobile internet device or
the ethernet interface. Only one IP address can be sent to the DynDNS
service and assigned to the receiver's host name. Per default, the
Ethernet IP
will be transmitted. Activate this check box to send the IP
of the mobile internet device.
Related topics
Receiver setup: Device Management: Overview
How to set up a mobile internet connection
162