Leica GR10 Operational Manual Download

Page: 269 / 317

Printed Documentation

GNSS Antennas Technical Data

Antenna Technical Data

Description and use

The antenna is selected for use based upon the application. The table gives a description and the intended use of the

individual antennas.

Type

Description

Use

AR25

Dorne & Margolin GPS, GLONASS,

Galileo, Compass antenna element with

choke ring ground plane.

Optional protective radome.

High end applications.

For example, monitoring tectonic plate
movements, first order control,
reference station.

AT504GG

Dorne & Margolin GPS, GLONASS L1/L2

antenna element with gold anodised

choke ring ground plane.

Complies with IGS type 'T' antenna, JPL
design. Optional protective radome.

High end applications.

For example, monitoring tectonic plate
movements, first order control,
reference station.

AR10

GPS, GLONASS, Galileo, Compass
reference station antenna with large
ground plane and built-in radome.

General use for standard and high
accuracy reference station and
monitoring applications.

AS10

Compact geodetic GPS, GLONASS,
Galileo antenna with built-in ground
plane.

Standard network RTK and monitoring
applications.

Dimensions

Type

AR25

AT504GG

AR10

AS10

Height

20.0 cm

14.0 cm

6.2 cm

Diameter

38.0 cm

24.0 cm

17.0 cm

Connector

AR25:

N female

AT504GG:

N female

AR10:

TNC female

AS10:

TNC female

Mounting

All antennas:

5/8" Whitworth

268

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands