Leica GR10 Operational Manual Download

Page: 149 / 317

Printed Documentation

GNSS management: Antenna management

Background information

Upload new antenna files, create new antennas and restore antenna default values.

Field Descriptions

The table below describes the fields in the Antenna management tab.

Field

Description

Loadable antenna files

The name of the antenna file. All antenna files loaded onto

the SD card are shown.

Location

The location of the antenna file.

Select to delete the antenna file.

Delete

Select to install the antenna file.

Install

Upload new antenna file

Select to upload a new LIST.ANT antenna file exported

previously from LGO from the computer to the receiver. The

File upload

page will open.

Installed antennas

All antennas currently configured on the receiver are listed.

Type

Shows the antenna type. Default antennas are available in

the factory default settings. User defined antennas have

been added manually.

Delete

Press

Delete

to permanently delete the antenna.

The

ADVULLANTENNA

can not be deleted.

Edit antenna

Press to edit the antenna settings. The

Edit antenna

page

will open. The antenna name cannot be edited.

The

ADVULLANTENNA

can not be deleted.

Create new antenna (copy)

Create a new antenna based on the settings of an existing

antenna.

Create new antenna

Press to create a new antenna. The

Create antenna

page

will open.

Restore default values

Restore the default antenna settings. This will restore all

default antennas with the factory default settings. User

148

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands