Leica GR10, Operational Manual

Page: 133 / 317

Printed Documentation
Create new Logging session - Logging session wizard
Logging session wizard: Create a new logging session / Edit a logging session
Setting Descriptions
The table below describes the settings that can be configured on the Create/Edit a logging session page.
Setting Description
Session name
Enter a unique logging session name.
•
Maximum number of characters allowed is 20.
•
Only certain ASCII characters are allowed.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
•
No spaces/blanks are allowed, however underscore (_) can be
used.
•
The session name is used in the folder structure when storing
log files.
Data type
Select the data type that shall be written.
•
MDB
•
RINEX
•
Compact RINEX (Hatanaka)
Session priority
Select the priority level to be used for
Smart clean-up
of the SD card,
either high, medium or low.
If
Smart clean-up
is activated then the session priority will determine
which logging session are stopped / saved if the SD card is nearing
capacity.
Read the topic GNSS management: Smart clean-up , for further information
on the
Smart clean-up
functionality .
Session type
Select the session type, either continuous or timed.
•
Timed:
Allows specific times to be configured for the session to
log data, including duration, repetition interval and the number of
intervals. Selecting timed will open an additional wizard step,
Session timing .
132