Leica GR10 Operational Manual Download Page 176

Page: 176 / 317

6: Context sensitive help

Remote access wizard: Configure TCP/IP client

Background Information

The TCP/IP client connection setting allows the receiver to act as a TCP client and connect to a configured IP

address and port. This way no port has to be opened in the firewall on the receiver side to allow clients to connect to

the receiver.

Setting Descriptions

The table below describes the settings that can be configured on the Configure TCP/IP client page.

Setting

Description

Server IP address

Enter the IP address or URL of the Server to connect to.

The IP range is from 1.0.0.0 to 223.255.255.254.

TCP/IP port

Enter the TCP/IP port on the Server for the receiver to connect to.

Press

to go back to the previous wizard step. Press

to continue to the next wizard step.

Press

to cancel and return to

Spider and remote access: Overview

175

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands