Printed Documentation
4: Install the firmware
After uploading, the firmware must be transferred from the SD card to the System RAM via the Web interface.
Prior to starting the installation, ensure that the GR10 is connected to a reliable power supply.
Step
Description
1
Go to the
Receiver Setup / Tools / Firmware
page.
2
The loadable firmware file will be shown in the table.
3
Click the
Install
button to install the new firmware. This may take several minutes.
4
The receiver will automatically reboot following the installation of the new firmware and you
will be directed to the
Log in
page.
5
To verify if the installation was successful go to the
Status / Receiver Information
page and
view the installed firmware versions.
Related topics
Firmware update using Leica GNSS Spider
Receiver setup: Firmware management
220
Summary of Contents for GR10
