Leica GR10 Operational Manual Download Page 72

Page: 72 / 317

6: Context sensitive help

Status: Receiver information - Options

Background information

The receiver options tab lists all the options available for this receiver and which of these options are already

installed.

•

To install new options go to Receiver setup / Tools / Options.

•

To view a detailed description of all options and their article numbers go to

GR10 Options

Field description

The table below describes the fields in the Status: Receiver information, Options tab.

Press the

Refresh icon

to update the displayed data.

Instrument details

Description

Installed options

Lists all options installed on the receiver.

Options currently not installed

Lists all options that are currently not installed on the receiver but are
available for purchase and installation.

Related topics

Status: Overview

Status: Receiver information

Receiver setup: Option management

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands