Leica GR10, Operational Manual

Page: 110 / 317

6: Context sensitive help
Outgoing data stream wizard: Configure LB2 data stream
Background Information
LB2 is the Leica proprietary binary protocol to interface with the receiver. An outgoing LB2 stream can contain
measurement data and/or satellite data.
Setting Descriptions
The table below describes the settings that can be configured on the Configure LB2 data stream page.
Setting Description
Measurement data
1.
Activate to stream LB2 data raw code and phase data for all tracked satellites.
2.
Select the message type to be sent out
•
Message D:
LB2 (D Message) supports GPS L1 and L2 and GLONASS L1
and L2 data.
•
Message E:
LB2 (Message) additionally supports GPS L5 and Galileo
signals and is more compact.
3.
Select the rate to send the measurement data.
Satellite data
Activate to stream satellite data and send out ephemeris data (GPS: 0x88, GLONASS:
0xD1) immediately when new data is available.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Outgoing data stream .
109