Leica GR10, Operational Manual

Page: 63 / 317

Printed Documentation
Use DynDNS and DHCP to automatically assign a host name and all network
parameters to a GR10
This procedure requires DHCP and DynDNS servers within the LAN. As a result all network parameters will be
assigned automatically. No IP address, subnet mask, gateway or DynDNS servers have to be assigned manually.
Besides, the assigned host name can be used to access the receiver within the network. Per default the
preconfigured host name GRxxxxxxx can be used, where “xxxxxxx” has to be replaced by the serial number of the
GR10.
Step Description
1
Enter the web interface using an Administrator user account.
2
Go to
Receiver Setup / Network Connections
.
3
On the Ethernet tab enter a receiver host name.
4
Tick the check box
Obtain an IP address automatically
.
5
Click on
Save changes
to save all settings.
Use DynDNS to assign a host name to a GR10 with static IP
This procedure requires a DynDNS server. As a result the assigned host name can be used to access the receiver
within the network. If no DHCP server is available all network parameters have to be entered manually. Please
contact your network administrator to get valid parameters.
If no DHCP is available a static IP address should be available which can be related to a host name using DynDNS.
Step Description
1
Enter the web interface using an Administrator user account.
2
Go to
Receiver Setup / Network Connections
.
3
On the Ethernet tab enter a receiver host name.
4
Do not tick the check box
Obtain an IP address automatically
.
5
Enter valid values for IP address, subnet mask and default gat way. e
6
Enter valid values for preferred and alternate DynDNS servers.
7
Click on
Save changes
to save all settings.
62