Leica GR10, Operational Manual

Page: 159 / 317

Printed Documentation
Receiver setup
Receiver Setup: Overview
Configure all receiver related settings such as network connections, FTP push locations and the user management.
Or use the tools to upgrade the receiver firmware, add new option keys or switch to your preferred language.
Menu option Description
Network Connections
Configure the receiver IP and DNS settings to allow access via the internet.
Selected devices such as mobile phones, modems and radios that can be
used for mobile internet access to the receiver.
Access Management
Create new users and set the access level for the receivers web interface.
Spider and remote access
Configure and open remote access connections for OWI based software,
such as GNSS Spider to the receiver.
Web server
Set the HTTP port number or configure secure access to the web interface
via an SSL (Secure Socket Layer) connection.
DynDNS
Allow access to the receivers web interface when using a dynamic IP
address by configuring and enabling the DynDNS functionality.
FTP server
Configure access to the receivers FTP server (SD card).
Device management
Create, configure or delete modem, radio and GSM devices to be used with
the receiver.
Event log
Activate the sending of event emails that contain the event log information.
Set the auto delete interval for all event log entries.
Power management
Configure the power up and low power behaviour of the receiver according
to the intended use case.
Tools
Load new firmware or purchased options to the receiver, change the
language or use the tools to format or reboot the receiver.
158