Leica GR10 Operational Manual Download Page 193

Page: 193 / 317

Printed Documentation

Device Management: Modem / Phone

Background Information

Create, configure or delete modem and phone (GSM) devices to be used with the receiver.

Setting Descriptions

The table below describes the settings that can be configured on the Modem / Phone tab.

Settings

Description

Icon

Device is in use. If a device is in

use it cannot be deleted.

Name

The device name.

Click the device name to view the currently
configured device communication settings.

Type

The device type, default or user defined.

Group

The device grouping, GSM/GPRS, CDMA,
TDMA, UMTS or modem.

Port

The port the device can be connected to.

Delete

Press delete to permanently delete the device.

Edit device

Press to edit the device settings. The edit
device wizard will open.

Create new device (copy)

Press to create a new device based on the
settings of an existing device.

Restore all default phones and radios

Press to restore the default values.

•

All device settings for default devices

are restored.

•

All deleted default devices are

restored.

•

All user defined device will be kept.

Related topics

Device Management: Radio

192

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands