Leica GR10, Operational Manual

Page: 108 / 317

6: Context sensitive help
and 19.
Additional messages sent: 3, 22, 23, 24
RTCM 2.x
(Type 1,2,18,19)
Output of both Code corrections and uncorrected carrier
phase data.
Additional messages sent: 3, 22, 23, 24
RTCM 2.x
(Type 1,2,20,21)
Output of both Code and carrier phase corrections.
Additional messages sent: 3, 22, 23, 24
RTCM 3 (Compact)
RTCM standard for correction transmission including
message types 1003 & 1011. Higher efficiency than
RTCM versions 2.x. Supports real-time services with
significantly reduced bandwidth.
Additional messages sent:1006, 1033
RTCM 3 (Compact &
ephemeris)
RTCM standard for correction transmission including
message types 1003 & 1011, satellite ephemeris GPS
data (1019) and GLONASS ephemeris data (1020).
RTCM 3 (Extended)
RTCM standard for correction transmission including
message types 1004 & 1012. Higher efficiency than
RTCM versions 2.x. Supports real-time services with
significantly reduced bandwidth.
Additional messages sent:1006, 1008, 1033
RTCM 3 (Extended &
ephemeris)
RTCM standard for correction transmission including
message types 1004 & 1012, satellite ephemeris GPS
data (1019) and GLONASS ephemeris data (1020).
Further information go to
•
RTCM Messages Types
•
Realtime message formats
Reference
station ID
Enter a reference station ID.
The reference station ID is converted into a compact format and sent out with real-time data
in all real-time data formats. It is different from the point ID of the reference station.
The reference station ID is also required when working with several reference stations in
time slicing mode on the same frequency. In this case, the ID of the reference station from
which data is to be accepted from must be typed in at the rover.
End of
message
Select Nothing or CR to add a carriage return at the end of the realtime message.
Time slicing
Activate or deactivate time slicing.
Select activate to delay the sending of the realtime message. This is required when a
107