Leica GR10, Operational Manual

Page: 20 / 317

2: Description of the system
Software: Overview
Software for GR10
Software type Description
GR10 firmware
(GR10_x.xx.fw)
The GR10 firmware is called RefWorx.
This important system software covers the basic functions of the instrument.
The onboard web server is integrated into the firmware and cannot be deleted.
The English language is integrated into the firmware and cannot be deleted.
Language software
(REF_LANG.sxx)
Numerous languages are available for the instrument web server. Language
software is also referred to as system language.
The system software enables a maximum of three languages which can be
stored at any one time - the English language and two other languages. The
English language is the default language and cannot be deleted. One language
is chosen as the active language.
Windows CE Operating
System
(GR10_WinCE_x.x.xx.fw)
Windows CE is the underlying operating system on the GR10.
Measurement Engine
firmware (ME4.xx.fw)
This file contains the Measurement Engine firmware for the GR10. This
firmware is always included in the GR firmware file however it is also possible to
load this file separately should an update become available.
Software upload
Softw re for a Description
GR10
All software is stored in the System RAM of the instrument.
A new firmware file must be uploaded to the SD card before installation. The file can
be uploaded via:
•
the GR10 Web interface.
•
direct copy to the SD card using a computer.
•
direct FTP access to the SD card.
After uploading, the firmware must be transferred from the SD card to the System
RAM via the GR10 Web interface. For detailed step-by-step instructions, refer to
Firmware upgrade step-by-step .
Leica GNSS Spider can also be used to install the firmware. Loading the firmware to
the SD card and installing it on the instrument is done in one step when using
GNSS Spider. Refer to the
Leica GNSS Spider Online Help
for more information.
19