Leica GR10, Operational Manual

Page: 157 / 317

Printed Documentation
GNSS management: New/Edit wake-up session
Setting Descriptions
The table below describes the fields in the New/Edit wake-up session page. This page opens when creating a new
Wake-up session with the Create new wake-up session button.
Setting Description
Name
Enter a unique name for the wake-up session.
If the Wake-up session is created from a logging session, the default name is
derived from the logging session name.
•
Maximum number of characters allowed is 20.
•
Only certain ASCII characters are allowed.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
•
Spaces / blanks, as well as underscore (_) are allowed.
•
The wake-up name can not be edited, once a session has been
created.
Wake-up at
The date and time for the receiver to boot for the first time with this Wake-up
session.
Power down
The date and time for the receiver to power down after the first wake up interval.
•
After:
Define the length of the wake up interval.
•
At:
Define the end time and date for the first wake up interval.
•
No end:
The receiver will not power down automatically after the wake-
up session has started.
No. intervals
The total number of repeats for the wake-up session.
•
Select
run
to enter a number of repetitions for this wake-up session.
•
Select
repeat infinitely
to configure a wake-up session with no defined
end.
•
Select
run once
to configure only one interval for a wake-up session.
Start next session
Only shown when
No. of intervals
is set to
run
or
repeat infinitely
.
Define the time between power down of one interval and the power up of the next
156