Leica GR10, Operational Manual

Page: 198 / 317

6: Context sensitive help
Receiver setup: Event log
Background Information
The Configuration: Event log page is used for configuring and editing the settings for sending automatic event emails
containing all messages from the event log.
The page also allows settings the automatic delete interval for all event log messages.
Setting Descriptions
The table below describes the settings that can be configured on the Event log page.
Cleanup Description
Autodelete event log entries
Select the time interval after which event log messages are deleted from
the receivers data base.
Event log emailing Description
Enable event email
Activate to send the content of the event log via email.
When activated the Event log emailing settings are visible and can be
edited.
Send event email to
Enter a single email address or a list of email addresses (separated by
semicolon ";") to send the event log to.
Email address of sender
Enter the email address to be displayed as the sender when emailing the
event log.
Mail server nam (SMTP) e
Enter the IP address or the domain name of the SMTP server to be used.
Mail server port
Enter the TCP port number of the SMTP server (commonly used defaults:
25 or 587).
Mail server username
Enter the username as configured for the SMTP server account.
Mail server password
Enter the password as configured for the SMTP server account.
Send event email every
Select the interval to send event email.
The email interval will be aligned with midnight UTC time. This means for
example, if you select a time interval of 6hrs and your local UTC time is
+2hrs, event emails will be sent at 8am, 2pm, etc...
Save changes
Press to store all event log and email settings.
Send test email
Press to send a test email using the entered settings. Check the event log
for results.
Restore default values
Press to fill the form with factory default settings.
The restore default button fills all fields with the default
values and stores these values. Pressing the save
button is not necessary. When accepting the
confirmation message, all settings on this page are
overwritten with the default settings.
Clear complete event log
Press to permanently remove all entries from the event log.
This can not
be undone!
197