Leica GR10 Operational Manual Download

Page: 33 / 317

Printed Documentation

Keyboard

Keyboard GR10

ON/OFF button

Function button

The instrument can be turned on and off by holding down the ON/OFF button for 2 s. A green steady light at the

power LED indicates that the instrument is turned on and ready.

ON/OFF button

Button

Function

ON/ OFF

If GR10 already off: Turns on GR10 when held for 2 s.

If GR10 already on: Turns off GR10 when held for 2 s.

Hold the ON/OFF button for 10 s, to force the instrument to turn off. Instrument settings and some

data can be lost when using this method.

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands