Leica GR10, Operational Manual

Page: 79 / 317

Printed Documentation
Status: Data streams
Status: Data streams - Outgoing
Background information
Displays a list of all configured Outgoing data streams from the receiver.
Field Description
The table below describes the fields in the Data streams / Outgoing tab.
The information shown is dependent on the settings configured via the Data stream wizard on the GNSS
management: Data streams / Outgoing tab page
The data streams can be sorted by each field by clicking on the header.
Press the
Refresh icon
to update the displayed data.
Real time Description
Icon Data stream is active.
Data stream is inactive.
Type/Message
The configured message type and version.
Click on the underlined message type to open a list box showing how many satellites are
used.
Data rate
The configured rate at which data is sent out.
Last sent
The latency of the last outgoing data stream sent in seconds.
The connection type and port over which the data stream is sent out.
Connection:
port
LB2 Description
Icon Data stream is active.
Data stream is inactive.
Data
Shows which data output is active;
Meas.Data
(measurement data) and
Sat.Data
(satellite data).
Message
The configured message type (D or E) that is sent.
Data rate
The configured rate at which data is sent out.
Connection:
port
The connection type and port used.
78