Krone Big Pack 1270 Original Operating Instructions Download Page 88

Page: 88 / 440

Start-up

8.10

Connecting joystick

BiG Pack 1270

Original Operating Instructions 150000747_02_en

8.10

Connecting joystick

INFORMATION

Follow the supplied joystick operating instructions for attachment of the joystick in the tractor
cabin.

KRONE ISOBUS terminal on tractors with integrated ISOBUS system

EQ001-150

The machine is shut down and safeguarded,

refer to page 27

Connect the 9-pin plug (2) of the cable (1) to the 9-pin socket (3) of the joystick.

Connect the 9-pin plug (4) of the joystick to the 9-pin socket (5) (In-cab).

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 88 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: