Krone Big Pack 1270, Original Operating Instructions, Page: 74 / 440

7 Initial operation
7.9 Mounting fire extinguisher
74
BiG Pack 1270
Original Operating Instructions 150000747_02_en
1
2
2
BP000-091
The inclination of the bale chute to ground can be set via the length of the bale chute supporting
chains (2).
ü
The machine is parked on stable, solid and even ground.
ü
The bale chute has been lowered, refer to page 136 .
„ Shut down and safeguard the machine, refer to page 27 .
„
Adjust the nuts (1) on both sides of the bale channel until the height of the bale chute back
edge is set appropriately.
For "Weighing device" version :
For the "Weighing device" version, the big bale is to rest temporarily on the bale chute so that it
can be weighed. For this reason, the inclination of the bale chute with the "Weighing device"
version is to be set less strong than the version without a weighing device.
If the inclination of the bale chute is changed, the weighing device must be readjusted, refer to
page 157 .
7.9 Mounting fire extinguisher
1
BPG000-034
ü
The machine is shut down and safeguarded, refer to page 27 .
„ Replenish the fire extinguisher (1) according to the operating instructions of fire extinguisher
manufacturer.
ð
It the operating instructions of the fire extinguisher manufacturer are missing, consult
the homepage of the fire extinguisher manufacturer.
„ Insert the fire extinguisher (1) into the left support on the drawbar so that the operating
instructions on the type plate are readable and show to the outside.