Krone Big Pack 1270 Original Operating Instructions Download Page 103

Page: 103 / 440

Operation

Pick-up

9.11

BiG Pack 1270

Original Operating Instructions 150000747_02_en

103

9.11.1

Locking/releasing pick-up via stop cock

BP000-128

The machine is shut down and safeguarded,

refer to page 27

Locking

Move stop cock (1) into position (I).

Releasing

Move the stop cock (1) into position (II).

9.11.2

Moving pick-up into transport/working position

Working position

In order to lower the pick-up into working position, move the single-acting control unit

(

) into the float position.

Transport position

In order to lift the pick-up into transport position, actuate the single-acting control unit

(

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 103 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: