manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 33 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 33

Safety

2

Safety labels on the machine

2.6

BiG Pack 1270

Original Operating Instructions 150000747_02_en

33

10. Ord. no. 939 529 0 (1x)

For France only

Danger from high-pressure liquid

The pressure accumulator is under gas and oil
pressure. There is a risk of injury when the
pressure accumulator is not removed or re-
paired properly.

„

Observe the notes in the operating
instructions before removing and repairing
the pressure accumulator.

„

The pressure accumulator must only be
removed and repaired by a specialist
workshop.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments