Krone Big Pack 1270, Original Operating Instructions, Page: 166 / 440

13 Terminal – Menus
13.14 Menu 13 "Counters"
166
BiG Pack 1270
Original Operating Instructions 150000747_02_en
Display range of detail counter
Icon Designation Explanation
Selected customer counter • Here customer counter 1
• Further information refer to page 164 .
“Total bales” counter Number of all bales
“Uncut bales” counter For the “cutting unit” version:
Number of uncut bales
“Cut bales” counter For the “cutting unit” version:
Number of cut bales
h
Operating hours counter Only counts when the PTO shaft is run-
ning.
“Total length” counter • Total length of all bales for this
customer.
• In m or ft (depending on selected system
of units).
Knot counter For the “MultiBale” version:
Including the MultiBale knot
"Total weight" counter For "Weighing device" version:
Total weight of all bales
“Average weight” counter For "Weighing device" version:
Average weight of the weighed bales
Resetting customer counter
The customer counter to be reset must not be activated.
„
To select the customer counter, press or .
„ Press .
ð
The selected customer counter is reset to zero.
ð The designation of the customer counter is not deleted.
Change the number of bales
„
Press or until the customer counter has been selected.
The selected customer counter must not be activated.