Krone Big Pack 1270 Original Operating Instructions Download Page 38

Page: 38 / 440

Safety

2.7

Safety equipment

BiG Pack 1270

Original Operating Instructions 150000747_02_en

2.7.1

SMV emblem

For the version with “SMV emblem”

KM000-567

The SMV emblem (Slow-Moving Vehicle) (1) can be mounted on slow-moving machines or
vehicles. The country-specific specifications must be observed.

The SMV emblem (1) is at the rear in the centre or on left.

If the machine is transported on transport vehicles (for example lorry or train), the SMV emblem
must be covered or dismounted.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 38 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: