Krone Big Pack 1270 Original Operating Instructions Download Page 235

Page: 235 / 440

Maintenance - Compressor

Checking oil level and changing oil at compressor

20.2

BiG Pack 1270

Original Operating Instructions 150000747_02_en

235

Changing the oil

A suitable container is available for escaping oil.

Pull out the oil dipstick (1).

Unscrew the drain plug (2) and drain the oil.

Screw in the drain plug (2) and tighten it firmly.

Fill in new oil through the filling hole of the oil dipstick (1).

Check the oil level with the oil dipstick (1).

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 235 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: