Krone Big Pack 1270, Original Operating Instructions, Page: 196 / 440

15 Settings
15.2 Setting the bearing pressure of the guide wheels
196
BiG Pack 1270
Original Operating Instructions 150000747_02_en
15.2 Setting the bearing pressure of the guide wheels
BP000-163
The factory setting for the pick-up in the highest raised position is X=285 mm .
ü
The machine is shut down and safeguarded, refer to page 27 .
„
Open the guard sheet of the pick-up.
„
In order to reduce the bearing pressure, increase dimension X via nut (2).
„ In order to increase the bearing pressure, reduce dimension X via nut (2).
„
Set the dimension X for both springs (1) identically on the right and left machine side.
„ Close the guard sheet of the pick-up.
15.3 Setting the crop press roller unit
WARNING
Risk of injury if the machine is used without a crop press roller unit
The crop press roller unit is used for accident protection! If the machine is operated without a
roller crop guide, people can be seriously injured or killed.
„
Never operate the machine without a crop press roller unit.
Setting the height of the crop press roller unit
1
2
3
4
4
BPG000-036