manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 188 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 188

14

Driving and Transport

14.4

Releasing the compressed air brake for manoeuvring the machine

188

BiG Pack 1270

Original Operating Instructions 150000747_02_en

ð

The icon flashes until the self-steering axle is released.

Æ

The display switches from 

 to 

.

Operation of machine without LS (Load-Sensing connection)

„

Pressurise the control unit (

).

Lock

„

Press 

.

ð

The icon flashes until the self-steering axle is locked.

Æ

The display switches from 

 to 

.

„

Depressurise the control unit (

).

Releasing

„

Press 

.

ð

The icon flashes until the self-steering axle is released.

Æ

The display switches from 

 to 

.

14.4

Releasing the compressed air brake for manoeuvring the machine

 WARNING

There is a increased risk of injury when manoeuvring the machine without the
compressed air brake system connected.

A machine without a connected compressed air brake system loses its braking
characteristics. People may be seriously injured or killed as a result.

Manoeuvring the machine in public road traffic without the compressed air brake system
connected is prohibited.

„

Never manoeuvre the machine in public traffic without the compressed air brake system
connected.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments