manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 120 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 120

10

KRONE ISOBUS terminal (CCI 1200)

10.2

Switching terminal on/off

120

BiG Pack 1270

Original Operating Instructions 150000747_02_en

10.2

Switching terminal on/off

EQ001-174

„

Before switching on the terminal for the first time, check that the connections are correct and
tight.

INFORMATION

When the terminal is switched on for the first time, the machine configuration is loaded into
the terminal and saved in the terminal memory. Loading may take a few minutes.

Switching ON

„

Press and hold down the key (1).

ð

If the machine is not connected, the display shows the main menu after switching on.

ð

If the machine is connected, the display shows the road travel screen after switching on.

Æ

The terminal is ready to operate.

If machine is not connected: “Main menu”

If machine is connected: “Road travel screen”

14:31

EQG000-056

The display appears in landscape mode after starting the terminal. Refer to the CCI terminal
operating instructions if you want the display in portrait rather than landscape mode or if you
wish to expand the terminal applications to full view.

Switching off

„

Press and hold down the key (1).

INFORMATION

„

For more details on how the terminal functions, follow the terminal operating instructions.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments