manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 233 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 233

Maintenance - Compressor

20

Cleaning/changing the filter element at compressor

20.1

BiG Pack 1270

Original Operating Instructions 150000747_02_en

233

20

Maintenance - Compressor

1

2

3

4

BP000-267

For version “Without compressed air brake"

The compressor (2) is located between the drawbar beams.

The compressed air for cleaning the knotter is supplied via a compressor (2) mounted between
the drawbar beams.

The compressor (2) is driven via a V-belt pulley (4) mounted on the flywheel and the V-belt (1).
The tension on the V-belt (1) can be changed by moving the compressor (2) in the oblong holes
(3).

For version "compressed air brake"

If balers are fitted with a compressed air brake, the compressed air connection on the tractor is
used to fill the compressed air reservoir for cleaning the knotter.

20.1

Cleaning/changing the filter element at compressor

1

2

3

4

5

3

BP000-266

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments