Krone Big Pack 1270, Original Operating Instructions, Page: 79 / 440

Start-up 8
Installing universal shaft 8.2
BiG Pack 1270
Original Operating Instructions 150000747_02_en 79
NOTICE
Changing the tractor
The machine could be damaged if the universal shaft length is not checked when changing
the tractor.
„
In order to avoid damage to the machine, check universal shaft length every time the
tractor is changed and correct it, if necessary,
refer to page 68 .
The wide-angle coupling is attached on tractor side.
BP000-095
ü
The machine is shut down and safeguarded, refer to page 27 .
On machine side
„
Mount universal shaft (1) on the drive journal of the intermediate bearing.
On tractor side
„
Slide the wide-angle coupling onto the tractor PTO shaft and secure it.
„
Secure the universal shaft guards (2) against turning by means of the retaining chains (3).
INFORMATION
For more details or in case of different universal shafts, refer to the operating instructions for
the universal shaft comprised in the delivery.
NOTICE
Damage to the machine due to swivel range of the universal shaft
Make sure to take into account the swivel range of the universal shaft in all operating states.
Otherwise parts may touch the universal shaft which leads to damages at the tractor and/or
machine.
„
Ensure there is enough room for the universal shaft to swivel in all operating states
(cornering with maximum steering angle).