Krone Big Pack 1270 Original Operating Instructions Download Page 160

Page: 160 / 440

Terminal – Menus

13.11 Menu 5 "Moisture measurement"

160

BiG Pack 1270

Original Operating Instructions 150000747_02_en

-5

25,2

5-2

EQ001-006 / EQ001-068

Menu 5 "Moisture measurement" has been selected,

refer to page 158

To open the menu, press

The display shows the "Correction value for moisture measurement" menu.

Recurring icons

refer to page 144

Display range

Pos.

Designation

Explanation

(1)

Correction value

Adjustable value range: +10 to -10

(2)

Value

Measured moisture

Determining the moisture

Use an external system to determine the moisture.

If the measured value matches the value (2) on the display, everything is correct.

If the measured value does not match the value (2) on the display, correct the value on the
display.

Setting the correction value

Press

until the value (1) matches the measured value.

To save the value, press

The

icon is displayed briefly.

The value is saved.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 160 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: