manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 173 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 173

Terminal – Menus

13

Menu 14 "ISOBUS" 13.15

BiG Pack 1270

Original Operating Instructions 150000747_02_en

173

Icon

Designation

Explanation

Mode 1/3

Background colour white

Recommended for the day.

Mode 2/3

Background colour grey

Recommended for the night.

Mode 3/3

Background colour auto-
matic

The background colour is specified by the
tractor via the parking light.

• Tractor parking light on, background

colour grey.

• Tractor parking light off, background

colour white.

Changing mode

„

Call up and save mode, 

refer to page 148

.

13.15.4

Menu 14-9 “Switching Between the Terminals”

INFORMATION

This menu is only available if several ISOBUS terminals are connected.

When the user switches terminals for the first time, the configuration of the machine is loaded
into the next terminal. The loading process can take a few minutes. The configuration is stored
in the memory of the next terminal.

Up to the next call, the machine is no longer available in the previous terminal.

When restarting, the system makes attempts to start the last used terminal. If the last used
terminal is no longer available (e.g. because it was dismounted), the restart is delayed as the
system searches for a new terminal and loads the specific menus into the terminal. The loading
process can take a few minutes.

EQG000-013

ü

The menu 14 “ISOBUS” has been selected, 

refer to page 169

.

„

To change to the next terminal, press 

.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments