Krone Big Pack 1270 Original Operating Instructions Download Page 161

Page: 161 / 440

Terminal – Menus

Menu 6 "Silage additive system" 13.12

BiG Pack 1270

Original Operating Instructions 150000747_02_en

161

13.12

Menu 6 "Silage additive system"

AUTO

3/3

6-1

EQ001-003 / EQ001-069

For The menu level is active,

refer to page 145

To open the menu, press

The display shows the "Silage additive system" menu.

Recurring icons

refer to page 144

Display area

One of three modes can be selected:

Icon

Meaning

Explanation

OFF

Mode 1/3

Silage additive system
switched off

Mode 2/3

Silage additive system
switched on

Continuous operation

AUTO

Mode 3/3

Silage additive system
automatic mode

The silage additive system is switched on
as soon as the pick-up is in the float posi-
tion.

Changing mode

Call up and save mode,

refer to page 148

13.13

Menu 8 "Self-steering axle"

In this menu it can be set whether and from what speed the self-steering axle is automatically
blocked/released by the system when moving forwards.

This machine is the "Comfort 1.0" version.

The tractor control unit (TECU) provides data for forward travel.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 161 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: