Krone Big Pack 1270, Original Operating Instructions, Page: 214 / 440

17 Maintenance - Lubrication
17.2 Lubrication chart - machine
214
BiG Pack 1270
Original Operating Instructions 150000747_02_en
DVG000-001
ü
The machine is shut down and safeguarded, refer to page 27 .
„
Observe operating instructions of the universal shaft manufacturer.
„ Lubricate the universal shaft at the lubrication intervals indicated in the following table using
a multi-purpose grease.
For a list of the lubricating greases to be used, refer to page 60 .
The following table provides information on lubrication quantity and interval per lubrication point.
Pos. Lubricant quantity Lubrication interval
(1) 26 g 50 hours
(2) 100 g
(3) 32 g
(4) 6 g
17.2 Lubrication chart - machine
The information on maintenance intervals is based on average load of the machine. In case of
an increased load and under extreme working conditions, the time periods must be reduced.
The types of lubrication are marked by means of icons in the lubrication chart, refer to table.
Type of lubrication Lubricant Comment
Grease Multi-purpose grease „ Apply two strokes of
lubricating grease from the
grease gun per grease
nipple.
„
Remove excess lubricating
grease at the grease nipple.
Oils Plant-based oils, unless spe-
cified otherwise. „
Use the spray can to apply
a thin, even layer of oil.
Oils Plant-based oils, unless spe-
cified otherwise.
„
Apply the oil evenly.