Krone AX 250 D Original Operating Instruction Download Page 49

Page: 49 / 398

Machine Description

Pos: 53 /Überschriften/Überschriften 2/A-E/Aufstiege @ 210\mod_1389101350145_78.docx @ 1729511 @ 2 @ 1

5.4 Ladders

Pos: 54 /BA/Wartung/Ladewagen/Laderaum Zugang @ 82\mod_1317015668486_78.docx @ 723450 @ @ 1

Access to the loading area:

Pos: 55 /BA/Wartung/Ladewagen/Laderaum / Einstiegsliuke GD Ausführung @ 82\mod_1317015803316_78.docx @ 723477 @ @ 1

GD design:

ZX400097

Fig. 9
•

For maintenance and repair work in the loading area, enter the loading surface through the
entry hatch (1).

•

After maintenance or repair work, close the entry hatch (1), fold up the ladder (2) and lock it
with the locking lever (3)

Pos: 56 /BA/Wartung/Ladewagen/Laderaum GL @ 82\mod_1317015861654_78.docx @ 723504 @ @ 1

GL design:

For maintenance and repair work in the loading area, enter the loading surface through the
opened tailgate.
•

Secure the tailgate against falling

•

Use a suitable climbing equipment

Pos: 57 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for AX 250 D















































































































































































































































































































































































































Search results

Summary of Contents for AX 250 D

Reviews:

Related manuals for AX 250 D

Brands by name

Popular brands

Krone AX 250 D, Original Operating Instruction

Search results

Summary of Contents for AX 250 D

Reviews:

Related manuals for AX 250 D

Brands by name

Popular brands