manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 26

Safety

 

 

26 

 

Pos: 25.67 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - Flüssigkeiten unter Druck -nur Hydrauliköl @ 244\mod_1395751930792_78.docx @ 1906831 @  @ 1 

 

Liquids under pressure 

The following liquids are under high pressure: 
– Hydraulic 

oil 

Liquids under high pressure may penetrate the body through the skin and cause serious 
injuries. 
• 

If a damaged pressure system is suspected, immediately contact a qualified service centre. 

• 

Never search for leaks with bare hands. Even a pin-sized hole may cause serious injuries. 

• 

Keep body and face away from leaks. 

• 

If liquids penetrate the body, immediately consult a doctor. The liquid must be removed from 
the body as quickly as possible. Danger of infection! 

 

Pos: 25.68 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - Heiße Flüssigkeiten @ 177\mod_1373282065737_78.docx @ 1509989 @  @ 1 

 

Hot liquids 

Risk of burns and scalding from hot liquids! 
• 

When draining hot consumables, wear protective gloves. 

• 

If required, leave liquids and machine parts to cool down before performing repair, 
maintenance and cleaning work. 

 

Pos: 25.69 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - beschädigte Druckluftanlage @ 177\mod_1373282282319_78.docx @ 1510018 @  @ 1 

 

A damaged compressed air system may damage your health 

Damaged compressed air hoses in the compressed air system may cause hoses to tear off. 
Flailing hoses may cause serious injuries. 
• 

If it is suspected that the compressed air system is damaged, immediately contact a service 
centre. 

 

Pos: 25.70 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - Giftige Abgase @ 177\mod_1373282632364_78.docx @ 1510047 @  @ 1 

 

Toxic exhaust gases 

Exhaust gases may seriously damage your health or be fatal. 
• 

While the engine is running, provide adequate ventilation to prevent prolonged exposure to 
exhaust gases. 

• 

Do not leave the engine running in a closed room unless there is a suitable exhaust gas 
extraction system. 

 

Pos: 25.71 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands