manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 289

 

Operation

 

289 

 

Pos: 144.12 /BA/Bedienung /Ladewagen/Querförderband/AX/MX_Baureihe/Verwenden der Heckbedienung AX @ 4\mod_1211362586671_78.docx @ 83356 @ 3 @ 1 

 

15.18.2 

Using the tail control unit  

TRD00065

Fig. 177 
 

 

Caution! 

Before starting the unloading process via the cross conveyor, ensure that the hand lever for the 
"discharge roller coupling" is in Pos. II (unloading process).  

 
Tail control is possible only in conjunction with the In-cab Comfort kit.  
The In-cab Comfort kit must be switched on to supply power to the tail control unit! After you 
switch In-cab Comfort kit to cross conveyor operation and switch on the tail gate control unit, the 
screen shown opposite appears on the In-cab Comfort kit display. It is no longer possible to use 
the In-cab Comfort kit. 
 

Pos: 144.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands