Krone AX 250 D Original Operating Instruction Download Page 16 | Manualshive

Page: 16 / 398

Krone AX 250 D Original Operating Instruction Download Page 16

Safety

16

Pos: 25.8 /Überschriften/Überschriften 3/K-O/Kinder in Gefahr @ 187\mod_1380011650765_78.docx @ 1606732 @ 3 @ 1

4.3.3

Children in danger

Pos: 25.9 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Kinder in Gefahr (Selbstfahrer) @ 175\mod_1372836765228_78.docx @ 1504851 @ @ 1

Children cannot assess danger and behave unpredictably.
As a result, children are especially at risk.
–

Children are especially at risk when climbing up and down the machine.

–

Children cannot be adequately secured on the self-propelled harvester.

–

Vibrations can be particularly harmful to children's bodies.

–

Children may cause the machine to make hazardous movements.

•

Never take children on the self-propelled harvester.

•

Keep children away from the machine.

•

Keep children away from consumables.

•

Especially before starting up and moving the machine, ensure that there are no children in
the danger zone.

Pos: 25.10 /Überschriften/Überschriften 3/A-E/A/Ankuppeln von Vorsatzgeräten oder Anhängern @ 187\mod_1380011743445_78.docx @ 1606761 @ 3 @ 1

4.3.4

Connecting front attachments or trailers

Pos: 25.11 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Ankuppeln der Maschine an den Traktor (Geräte u. Anhänger) (2014-07-15 09:32:48) @ 176\mod_1372842720034_78.docx @ 1505787 @ @ 1

If the tractor and the machine are not correctly connected, there is a risk of causing serious
accidents.
•

When connecting front attachments or trailers, follow all operating instructions:
–

The operating instructions for the tractor

–

The operating instructions for the machine

–

The operating instructions for the universal shaft

•

Follow the coupling instructions, see the chapter "Connecting the machine to the tractor".

•

Note the modified driving behaviour of the combination.

Pos: 25.12 /Überschriften/Überschriften 3/A-E/B/Bauliche Änderungen an der Maschine @ 187\mod_1380011874486_78.docx @ 1606786 @ 3 @ 1

4.3.5

Structural changes to the machine

Pos: 25.13 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Bauliche Änderungen an der Maschine @ 176\mod_1372843690190_78.docx @ 1506085 @ @ 1

Structural changes and enhancements may impair the functionality and operational safety of the
machine. As a result, people may be seriously injured or killed.
•

Have structural changes and enhancements performed by an authorised service centre
only.

Pos: 25.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
14
15
16
17
18
...
»

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands