Commissioning
74
Pos: 119.30 /BA/Anhang - Erstmontage/Ladewagen/Montage der Aufbauten AX Teil 3 @ 155\mod_1363767804442_78.docx @ 1375954 @ @ 1
Canvass, back
2
7
4
5
7
3
9
AX000005
10
4
2
2x M8
2x M8x70
4x A 8,4/24x2
Figure 30
•
Insert the clamping plate (10) through the seam of the rear canvass (2).
•
Screw the cable holder (4) onto the clamping plate (10).
•
Push the tubing for the canvass (7) through the seam (2) of the rear canvass as well as
through the supports of the hood sheet and secure with the linch pin.
•
Attach the synthetic ropes (5) to the cable holder (4) (make sure, the synthetic ropes run
under the tubular bar).
•
Route the tubing for the canvass (7) through the support of the tubular bar and secure with
the linch pin.
•
Attach the canvass (2) to the rear side wall, using a spacer sleeve, screws, washer and nut.
•
Attach the tensioning cable (3) to the spacer of the tubular bar.
Pos: 119.31 /BA/Anhang - Erstmontage/Ladewagen/Montage der Aufbauten AX Teil 4 @ 155\mod_1363767755660_78.docx @ 1375925 @ @ 1
