KRONE operation terminal Alpha
118
Pos: 125.43 /BA/Info-Center/Ladewagen/Medium/Parameter Heckklappensensor (nur GL-Ausführung) @ 141\mod_1355742564240_78.docx @ 1253912 @ 2 @ 1
9.17
Parameter „Tailgate Sensor“ (Only For GL Design)
Fig. 69
Bar graph on:
Parameter „Sensor top“ (sensor top installed on tailgate)
Bar graph off:
Parameter “sensor bottom” (sensor bottom installed on tailgate)
If the job computer has been replaced, it is necessary to check the parameter for the tailgate
sensor and to change this parameter, if required.
Checking the “tailgate sensor” parameter and adjusting it, if required.
•
Switch on the sensor test (refer to chapter KRONE operation terminal Alpha entitled
“Sensor Test”).
• Press
the
key (7).
Indicator lamp (2) goes out and indicator lamp (7) flashes.
Setting parameter to “sensor bottom”
• Press
the
key (9).
The
“sensor bottom” parameter is set, the bar graph is off.
Setting parameter to “sensor top”
• Press
the
key (10).
Parameter “sensor top” is set, the bar graph is on.
Switching off the control unit
• Press
the
key.
Pos: 125.44 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
