Krone AX 250 D Original Operating Instruction Download Page 102

Page: 102 / 398

KRONE operation terminal Alpha

102

Pos: 125.15 /BA/Info-Center/Ladewagen/Medium/Bedienenheit ein- /ausschalten @ 141\mod_1355479288253_78.docx @ 1252781 @ 2 @ 1

9.4

Switching On/Switching Off Control Unit

AX000035_2

Fig. 54

Switching on

•

Press the

key.

A brief self-test is carried out:
–

All LEDs light up briefly.

–

A horn is sounded.

–

All LEDs go out.

The indicator lamp (1) lights up continuously, the control unit is switched on.

Switching off

•

Press the

key.

The indicator lamp (1) goes out; the control unit is switched off.

Pos: 125.16 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for AX 250 D















































































































































































































































































































































































































Search results

Summary of Contents for AX 250 D

Reviews:

Related manuals for AX 250 D

Brands by name

Popular brands

Krone AX 250 D, Original Operating Instruction

Search results

Summary of Contents for AX 250 D

Reviews:

Related manuals for AX 250 D

Brands by name

Popular brands