manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 158

KRONE ISOBUS Terminal - unloading operation

 

 

158 

 

Pos: 129.54.1 /Überschriften/Überschriften 1/K-O/KRONE ISOBUS-Terminal - Entladebetrieb @ 264\mod_1400139036137_78.docx @ 2008641 @ 1 @ 1 

 

12 

KRONE ISOBUS Terminal - unloading operation  

Pos: 129.54.2 /Überschriften/Überschriften 2/A-E/Entladebetrieb @ 183\mod_1378186259685_78.docx @ 1569475 @ 2 @ 1 

 

12.1 

Unloading Operation  

Pos: 129.54.3 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Entladebetrieb/Voraussetzung ist, dass das Grundbild „Entladebetrieb“ aufgerufen ist. @ 183\mod_1378186894912_78.docx @ 1569670 @  @ 1 

 

A pre-condition is that: 
– 

The basic screen “Unloading Operation” is called. 

 

Pos: 129.54.4 /Überschriften/Überschriften 3/K-O/Lenkachse sperren / lösen @ 183\mod_1378103869006_78.docx @ 1568283 @ 3 @ 1 

 

12.1.1 

Locking / Releasing Steering Axle   

Pos: 129.54.5 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-BiG Pack/Funktionstasten F1 bis F 12/Seite 1/2 F4 Nachlauf- Lenkachse sperren/lösen @ 183\mod_1378194590723_78.docx @ 1570005 @  @ 1 

  

Releasing  

• 

Press the function key for softkey 

 to release the coaster/steering axle.  

The softkey flashes until the coaster/steering axle is released. In the display, the softkey 

changes from 

 to 

.  

 

Locking  

• 

Press the function key for softkey 

 to lock the coaster/steering axle. 

The softkey flashes until the coaster/steering axle is locked. In the display, the softkey changes 

from 

 to 

. 

 

Pos: 129.54.6 /Überschriften/Überschriften 3/K-O/Liftachse heben / senken @ 183\mod_1378193146412_78.docx @ 1569908 @ 3 @ 1 

 

12.1.2 

Raising / Lowering the Lift Axle   

Pos: 129.54.7 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Ladevorgang/Liftachse heben / senken @ 183\mod_1378192864502_78.docx @ 1569880 @  @ 1 

 

Raising  

• 

Press the function key for softkey 

 to raise the lift axle.  

The softkey flashes if the lift axle is raised. In the display, the softkey changes from 

 to 

.   

 

Lowering  

• 

Press the function key for softkey 

 to lower the lift axle. 

The softkey flashes until the lift axle is lowered. In the display, the softkey changes from 

 

to 

.  

 

Pos: 129.54.8 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Ladevorgang/Menü Zwangslenkung aufrufen Schnellzugriff @ 183\mod_1378193890270_78.docx @ 1569937 @ 3 @ 1 

 

12.1.3 

Bringing up the “Electronic Forced Steering” Menu  

• 

Press the function key for softkey 

 to bring up the “Electronic Forced Steering”, the 

“Forced Steering” menu is displayed. 

For information regarding settings, please refer to “Electronic Forced Steering” menu. 
 

Pos: 129.54.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands